Clean TeQ Aromatrix Pty Ltd brings together two of Australia’s largest and most experienced air purification companies to deliver solutions for the treatment of odours, volatile organic compounds, toxics and dust. Our ability to act as an EPCM contractor makes us a one stop shop for all air purification solutions. In addition to these offerings we also provide engineering consulting service and maintenance capabilities across Australia. Our combined experience of over 30 years brings a wealth of knowledge and references that support our status as Australia’s leading air purification provider.
Our technologies include our OdourTeQ® Biological Filters which can be delivered as either a Biotrickling Filter or BioFilter depending on the application, both are highly suited to the treatment of odours commonly found in wastewater treatment plants, sewerage treatment plants, sewerage pump stations and biogas conditioning applications. Our range of CleanCarb™ Activated Carbon Filters can be deployed as a standalone technology or the perfect polishing filter for our OdourTeQ® Systems. ThermTeQ® Regenerative Thermal Oxidisers are the efficient sustainable solution for the treatment of VOC’s. Our CleanStrip™ degassers and strippers are capable of removing a number of compounds from water streams for purification and alkalinity correction. Last but not least as Australia’s exclusive distributers of the Advanced Cyclone System’s Hurricane® and Recyclone® dust treatment technologies we are able to provide dust removal down to as low as 15mg/m3.
Unit 11, 16-17 Mahogany Court Willawong Queensland 4110 Australia
Manufacturers of CLEARBORE, a product that dissolves blockages in bores, pumps and reticulation systems caused by iron and iron-related bacteria in the groundwater.
Bacterial populations form rust coloured encrustations that block bore screens and pumps and reduce the flow spaces throughout the irrigation system. This situation results in:
• Pump operating problems caused by resistance to heat flow
• Increased pumping costs caused by increased friction
• Reduced bore yield caused by reduced or plugged flow spaces
• Blockages in pumps and irrigation systems
• Decreased water quality
• Increased iron-staining of infrastructure
Regular CLEARBORE treatments keep bores and pumps clear of the iron build-up and operating at maximum yield. CLEARBORE addresses environmental concerns by maximising the efficiency of existing bore installations and extending their useful life.
Clearbore Pty Ltd is supported by a strong dealership network throughout Australia and proudly exports Australian-made products to New Zealand, Papua New Guinea and the UK.
Clearbore Pty Ltd also manufactures X-FE and X-FE Forte, bore water and iron stain removers.
All our products are performance guaranteed, easy to use, cost effective and completely biodegradable.
Visit our website: http://www.clearbore.com.au for full product descriptions and gallery pics.
PO Box 347 North Richmond NSW 2754 Australia
10 Caribbean Drive (Hallmark Building) Scoresby Victoria 3179 Australia
PO Box 2770 Bendigo Victoria 3554 Australia
PO Box 31 Kotara NSW 2289 Australia
40 Willandra Drive Epping Victoria 3076 Australia
Conhur are digester cleaning specialists.
Our services include dredging, dewatering, sludge removal, pumping, waste management, plant hire, polyethylene welding hydro testing, and pipeline construction.
Established in Australia and New Zealand.
PO Box 151 Hervey Bay Queensland 4655 Australia
Control Components is a technical distributor of control and analytical instrumentation for water, environmental and allied industries.
Our online analytical sensors provide real-time feedback on DO, nitrate, nitrite, BOD, COD, TOC, DOC, SAC254, UVT, colour, algae (including blue-green algae), oil-in-water, pH, turbidity, conductivity, ORP and more. With both optical & microwave TSS sensors we can reliably monitor MLSS, RAS / WAS, digested and dewatered sludge both inline and in open channels to improve processes.
We can offer both handheld & process mounted sensors, including industry leading sludge blanket sensors for optimisation of clarifiers & thickeners.
At our Sydney office we custom build Weka magnetic visual level Indicators (VLI) made from engineered plastics (for chemical storage tanks) & 316SS (e.g. DAF saturators & surge vessels).
As the Australian representative of Cerlic, TriOS, Besta (Trimod), Weka, Kari, Gems Sensors, ITT Neo-Dyn / Conoflow, Eletta & Sitron we carry inventory of all these brands & have established Distributor partners throughout Australia & New Zealand.
PO Box 212 Caringbah NSW 2229 Australia
At Control Logic, we bring to market brilliant products and services that increase reliability, safety & efficiencies within your business and processes. We value relationships and place great importance in collaborating to understand the goals that drive your business, in turn allowing us to deliver optimal solutions that create foundations of mutual respect & trust.
We specialise in the provision of solutions and support of industrial, electrical and automation products and services within the water sector. Some of the areas our diverse expertise can add value include: carbon emissions and energy consumption reduction; equipment operational efficiency; reduce mean time to repair, leak detection; best efficiency point pumping, flow rate control, flux optimisation, solar pumping, irrigation, safety, IOT; arc fault and surge protection, automation and controls.
Internally, our sales, development and applications engineering experts, partner with global brands to deliver robust outcomes and training for your business. This service also extends to 24/7 emergency, engineering technical support and warranties that protect your investments. We are proudly 100% Australian owned and operated with a national footprint. Our commitment is to deliver quality products, solutions, services and expertise to the water stakeholder network.
25 Lavarack Avenue Eagle Farm Queensland 4009 Australia
Convergent Water Controls (CWC) is a leading supplier of the following products to the Australian water treatment industry: Cooling Tower Dosing Packages, Corrosion Coupon Racks, Dosing Pots, Chemical Dosing & Transfer Pumps, Sensors, Instruments and Controllers with Remote Control capability.
From our humble beginnings over 20 years ago, we now have a major presence in the commercial and industrial cooling water, process water, potable water, process and wastewater markets.
CWC are also the exclusive Australian agents for DIGICHEM Plus+, EMEC, ARGAL, Endress & Hauser Conducta Inc, MIXTRON & Rhomberg Electronics.
Our most exciting new products are the EMEC PRISMA Stepper Motor Dosing Pump, the Centurio Pro 6 channel multi-parameter controller, and the Mixtron Water powered proportional dosing pumps.
PO Box 7058 Alexandria NSW 2015 Australia
116 Kendal Street Cowra NSW 2794 Australia
Cromarty provides electrical, automation and business improvement solutions for industrial manufacturing, process plants and utilities.
Our automation and control solutions range from providing a simple single measurement to highly complex integrated automation and reporting systems. Our focus is on maintaining and growing our relationships with our clients through best practice, technical expertise, ethical values and flexible solutions. Our philosophy is to not only meet our clients requirements but to exceed them.
Our expertise includes instrument and electrical design, DCS/SCADA/PLC systems design and programming, plant upgrade projects in automation and control, industrial networking, manufacturing execution system (MES), interfacing with enterprise resource planning (ERP) Systems and communications and complete turnkey projects. We also provide after sales support and product sales.
79 Howick Streeet South Launceston Tasmania 7249 Australia
CRS Water Pty Ltd is a Sydney based environmental engineering company specialising in the design, manufacture and installation of packaged water and wastewater treatment plants.
We have plants operating successfully in all parts of the world including Siberia, Africa, Asia and the Pacific.
A range of technologies, both innovative and proven, is employed in the design of our systems resulting in reliable, economical outcomes for our clients. These are supported through operator training, expert service, spares and remote data and alarm tracking (RemCon ). Our innovation is typified by our novel Envitubes™, geotextile sludge dewatering technology. CRS Water Pty Ltd also undertake turnkey sludge dewatering projects with our sister company Dredging Solutions P/L, providing sludge lagoon mapping, sludge harvesting, chemical conditioning, dewatering (passive with Envitubes or mechanical with a mobile, containerised centrifuge) and off-site disposal.
PO Box 6020 Baulkham Hills BC NSW 2153 Australia
CSE Uniserve provides high quality local engineering design services, support and effective delivery of technically advanced products and systems to the mining & heavy industry, electrical and water utility, renewable energy, transport, and oil & gas markets.
CSE Uniserve has been providing services to the Australian mining industry for 40 years. Our focus is to deliver the most innovative protection, motor control and ruggedised Ethernet communication solutions for the management of both power system and electric motor assets including all forms of traditional and renewable energy generators, electrical transmission and distribution networks, mining and heavy industry applications, LNG compression & pumping facilities and oil & gas facilities.
Our success comes from combining the expertise of our engineering design services with our world leading technologies including GE Digital Energy Multilin protection relays and substation automation devices, RuggedCom Industrial Ethernet and data management solutions, Fuji, Univerter LV & MV Drives, Rotor Drive Slip Energy Recovery Drives, distribution and power transformers, Unistarter Liquid Resistance Starters, Solcon LV & MV soft starters and Elspec Power Quality metering and solutions.
Our capabilities include design, manufacture, installation, commissioning, servicing, custom enclosure design, harmonic mitigation and power quality solutions for large power motor control application along with communications network engineering services for critical infrastructure applications.
10 Columbia Way Baulkham Hills NSW 2153 Australia
PO Box 82 Lane Cove NSW 1595 Australia
Cyndan is a 100% Australian owned business. We have been manufacturing and distributing a broad range of chemicals since 1978. We have established a loyal customer base supported by our well-qualified team of Sales professionals operating throughout Australia to deliver excellent customer service and advice. Our products are also available for ordering online, or through a number of Distributors, thereby ensuring customers can be serviced however best suits their individual needs.
Cyndan has steadily grown its market share by focusing on the quality of our chemicals. Our products offer some of the highest dilution rates on the market meaning that when you order from Cyndan, you get a longer lasting solution that does a fantastic job. This is why some of the largest industrial and corporate businesses in Australia are regular Cyndan customers of our more than 250 products.
Download our Water & Wastewater Catalogue at http://cyndan.com.au/catalogues It includes algae, foam, drain, spill, descaling & odour solutions, as well as cleaners, degreasers, disinfectants and specialty coatings.
Cyndan has preferred supplier status for the provision of Chemicals to all NSW, QLD & NT Councils, QLD State Government (including Water Authorities) and is a regular supplier to Government Water Authorities across remaining States.
Unit 7, 9-13 Winbourne Road Brookvale NSW 2100 Australia
Click here to get your
business listed in the
Corporate Members Directory
PO Box 6012, Shepparton Victoria Australia 3632
24 New Dookie Road, Shepparton Victoria Australia 3630
03 5821 6744
03 5821 6033
ABN: 83 123 468 422