C – Tech Services Pty Ltd is an Australian owned company that has been delivering specialist disinfection services to the water industry since 1993. Pioneers in the development of portable disinfection systems such as “Chlorine Residual Trim Units” used by 10 major Victorian Water Authorities, and remote “On-Line” monitoring equipment such as the exclusive “MONIpLUG®” systems. They provide Build, Own, Operate and Transfer, (BOOT), Disinfection Systems encompassed by a total “Caretaker Management” approach.
1/9 Hogan Court Pakenham Victoria 3810 Australia
Unit 3, 36 Holbeche Road Arndell Park NSW 2148 Australia
PO Box 359 Cairns Queensland 4870 Australia
Creating new materials, solving global challenges.
Calix is a multi-award-winning Australia technology company that is developing new processes and materials to solve global challenges.
The core technology is a world-first, patented “kiln” built in Bacchus Marsh, Victoria that produces “mineral honeycomb” – very highly active minerals!
Calix is using these minerals, which are safe and environmentally friendly, to improve waste water treatment and phosphate removal, and help protect sewer assets from corrosion.
ACTI-Mag™ is a concentrated stabilised suspension of magnesium hydroxide, an inorganic compound with the chemical formula Mg(OH)2. Because it is manufactured in Calix’s patented calcining technology from highly reactive magnesium oxide powder, ACTI-Mag™ imparts superior neutralisation capacity and speed, while being safer to handle than other traditional alkalis.
ACTI-Mag™ has a higher neutralising value per dry kilo when compared with caustic and lime, which lowers chemical consumption, making ACTI-Mag™ a cost competitive option due to the reduction in plant and equipment requirements. ACTI-Mag™ is also used extensively for hydrogen sulphide gas (H2S) control in sewers and industrial waste treatment systems. Highly fluid, ACTI-Mag™ has proven to flow easily in most dosing systems.
PROTECTA-Mag™ provides an enduring high pH surface coating for concrete sewer infrastructure, preventing corrosion of man holes, wet wells, parts of sewage treatment plants and large diameter sewer pipes. PROTECTA-Mag™ is safe, environmentally friendly, cost effective and can be applied without shutting down or isolating the sewer.
PROTECTA-Mag™¬ is a concentrated, controlled viscosity, stabilised suspension of magnesium hydroxide liquid (MHL). The thixotropic properties of PROTECTA-Mag™ allow the suspension to be easily pumped for spraying.
Calix’s technology has also been adopted overseas, where we are working with some of the world’s largest companies, governments and research institutions on CO2 capture.
Level 1, 9 Bridge Street Pymble NSW 2073 Australia
Capari pumps are able to meet the diverse needs of the customer, from submersible pumps for the collection of water from deep wells into the aquifer, to horizontal pumps for supplying the water system. From the treatment of domestic and industrial waste water to the transport and transfer of purified water. Pump
3 Jeanes Street Beverley SA 5009 Australia
CAPS Australia, a 100% Australian owned company, has been supplying a wide range of industrial products to water & waste water treatment, manufacturing, mining, oil and gas, infrastructure, primary industries and a wide spectrum of clients throughout Australia for 30 years. Today, CAPS is recognised as a single source of supply for total air requirements for any low pressure, vacuum or compressed air applications, as well as gas and power generation technology.
CAPS has the expertise through their manufacturing/projects engineering team to design and build special custom made blower and compressor packages to suit any application, as well offer standard off the shelf products.
For the water & waster treatment applications, CAPS has the capability to select, design, assemble, sell and service blowers (both PD and Centrifugal), Compressed air systems (oil lubricated & oil-free) and power generation systems.
CAPS knows the importance of after sales support, evidenced by their 24/7 service support and well equipped aftermarket teams throughout the country, with branch offices in Kalgoorlie, Adelaide, Melbourne, Sydney, Newcastle, Brisbane, Darwin, Mackay and its head office in Perth. CAPS offer a range of servicing and maintenance options which can be adapted to suit every requirement. CAPS also offers hire equipment for short to long term use.
PO Box 936 Cloverdale WA 6985 Australia
74-80 Fitzgerald Road Laverton Victoria 3026 Australia
PO Box 887 Innisfail Queensland 4860 Australia
Cathic is a specialised mechanical services plumbing contractor whose employees have been successfully supporting the needs of Water Authorities, Industry and Regional Australian businesses for over 30 years. We specialise in complex and unique pipe work such as Polypropylene (PP) and Polyvinylidene Fluoride (PVDF) amongst others which are more often found in chemical dosing & storage area which is our specialty.
Our capabilities also include all general plumbing and we are licenced with the Plumbing Industry Commission. We have equipment on hand and are certified in HDPE, PP & PVDF butt welding, EF welding, IR welding and socket fusion welding, and we are able to fabricate specialised fittings for all of the above. We are also able to perform stainless steel and carbon steel installation.
Additionally we provide onsite supervision of work packages, such as mechanical installations on water treatment plants with daily or hourly hire of supervisors and skilled tradesmen. Cathic is the preferred installer for Piping and Automation Systems a George Fischer affiliate.
Our staff’s experience and expertise in building water, wastewater and stormwater solutions are well known.
We consider it critical to maintain a deep understanding of issues and challenges facing Industry, Water Authorities and Regional Australia.
Factory 6-73 Assembly Drive Dandenong South Victoria 3175 Australia
Ballyreagh Industrial Estate Cookstown BT80 9DG Northern Ireland
Formerly Gosford City Council and Wyong Shire Council
PO Box 20 Wyong NSW 2259 Australia
PO Box 152 Ballarat Victoria 3353 Australia
The Centroc Water Utilities Alliance (CWUA) was established in 2009 and comprises 11 Central NSW Councils including Bathurst, Blayney, Cabonne, Cowra, Forbes, Lachlan, Oberon, Orange, Parkes and Weddin as well as Central Tablelands Water
The CWUA takes a unified approach to support member Councils in meeting Best Practice in water and sewer management and in achieving cost savings and efficiencies including in asset management and workforce training and development. It does this through a regional procurement program, mentoring and the sharing of knowledge and resources. Programming is innovative and focused on compliance-based best practice service delivery to achieve optimal outcomes for communities with a focus on the security and quality required to meet increasingly stringent, regulatory standards.
PO Box 333 Forbes NSW 2871 Australia
Challenger Valves are a leading manufacturer, supplier and distributor of valving and actuation to the Waste Water Industry, providing products and solutions for the treatment of Sewage, Aeration, Water, Sludge, Buried service and Irrigation processes as well as general industrial valve and actuation needs. We stock a wide range of products in various materials including ductile iron, stainless steel, brass and uPVC to handle a wide range of industrial applications. Challenger are the Australian distributors for “CLA-VAL” automatic control valves. “CLA-VAL” is the world’s leading brand for automatic control valves including, Pressure reducing, Pressure sustaining , Altitude and tank filling, in a wide range of materials and sizes.
The companies’ head office is located in Shepparton, north of Melbourne in central Victoria, with a 2400m² purpose built facility, which includes production, storage, actuation centre and testing, in addition to these facilities Challenger have a fully equipped maintenance vehicle which has service and testing facilities.
Challenger Valves operate sales and warehouse branches in Brisbane, Melbourne, Perth, Sydney and Newcastle, supporting an Australia wide distributor network.
3 Glenn Street Shepparton Victoria 3630 Australia
Level 3, 112 Wellington Pde East Melbourne Victoria 3002 Australia
PO Box 1365 Berrimah NT 0828 Australia
Chisholm offers a range of qualifications from Certificate II, III, and IV right through to the Diploma of Water Operations with the flexibility of on campus or workplace training. The Water Operations team at Chisholm has partnered with industry to successfully deliver training nationally across a range of qualifications within the Water Operations training package.
Experienced trainers who are experts in their respective fields and with extensive industry links are able to customise training and assessment to ensure it is relevant, practical and applicable to participant job roles as well as meeting specific identified business needs.
Chisholm Institute has a purpose built training facility for the water industry at our Cranbourne Campus in Victoria where students get an opportunity to be involved in a ‘hands on’ water treatment process. At the Cranbourne Campus, students get the opportunity to work in a live plant environment focusing on Reverse Osmosis, Ion Exchange, Media Filtration and Clarifiers. A dedicated laboratory for the water industry is also available for training and industry projects.
In addition to Water Operations training, Chisholm also offers over 330 certificate, diploma, advanced diploma and graduate certificate courses as well as conducting over 300 short courses for industry compliance and skills development.
PO Box 684 Dandenong Victoria 3175 Australia
35 Elliott Road Dandenong South Victoria 3175 Australia
PO Box 5042 Gold Coast MC Queensland 9729 Australia
City Water Technology (CWT) are leading water and wastewater process engineers and scientists with 26 years of involvement with private and public utilities across Australia as well as NZ, PNG, Sri Lanka and China. CWT have been extensively involved at all levels of the D&C planning process, including undertaking activities in commissioning, process optimisation, concept design, technical specifications, pilot plants, jar testing and the preparation of management documents.
CWT prides itself in their ability to work effectively with operators through training, delegating and involving them in improvement processes.
26/ 924 Pacific Highway Gordon NSW 2072 Australia
Click here to get your
business listed in the
Corporate Members Directory
PO Box 6012, Shepparton Victoria Australia 3632
24 New Dookie Road, Shepparton Victoria Australia 3630
03 5821 6744
03 5821 6033
ABN: 83 123 468 422