360 Engineering is a wholly Australian owned automation and electrical service provider operating in the water/wastewater industry. We provide a complete solution for electrical projects from initial design to installation and commissioning. To maintain our delivered solutions, we also offer support contracts and service level agreements.
Our range of services include telemetry, electrical design, PLC/RTU programming, radio networks, SCADA development, industrial networking, electrical installation, commissioning and 24/7 support.
37South is a Melbourne based Industrial Product Design and Engineering Company.
37South designs and develops class-leading ultra-low powered 3G / 4G Cellular, IoT, Radio and Satellite based RTU and Data Logger products, supporting the industry standard DNP3 protocol for the utility sector under the brands of Site Sentinel® and Metermade®.
We have a long history of delivering innovative SCADA and Communications Systems Integration solutions in the Utility sector across Australia and a rich heritage in the product design space for the Utility industry.
All Site Sentinel and Metermade products are proudly designed and manufactured in Australia, preserving our long-standing commitment to our end customers of Australian Made products with high reliability operation and crucially, local product support.
Our products are trusted by Australia’s leading Utility organisations, with over 3,500 units deployed.
ABB is a leader in power and automation technologies that enable utility and industry customers to improve performance while lowering environmental impact. The ABB Group of companies operates in around 100 countries and employs about 124,000 people.
For nearly 50 years, ABB has been equipping thousands of water plants and networks, providing products, systems and services in countries worldwide. ABB provides expertise and solutions for all activities related to the water lifecycle, from water intake to re-introduction into the environment.
ABB provides complete solutions in the water industry for electrical and automation processes: drives and motors; instrumentation; control products and PLCs (programmable logic controllers); low-voltage, medium-voltage and high-voltage switchgears and components; transformers; SCADA systems (Supervisory Control and Data Acquisitions); DCS (Distributed Control Systems); communication. In Australia, we also have NATA approved flow calibration testing facilities.
ABB expertise helps customers by addressing their needs and building up complete solutions. For further information see http://www.abb.com/water.
The One Stop Shop for all your Lifting, Rigging, Height Safety, Confined Space gear, Training, Personal Protective Equipment & Safety needs!
Let us come to your site for…….
Inspections, Certification and Repairs of all your Lifting, Rigging, Height Safety & Confined Space Equipment. ‘’Core Software Cloud Asset Management with Login’’
Some of our Plant & Equipment:
• NATA Accredited facility with the largest Mobile Testing
Laboratory on wheels.
• 20 Ton Test Tower
• 150 & 600 Ton Mobile Wire Rope Swaging Presses
• 5 Ton Mobile Wire-Winding Machines & Drum Frames
• 25kN & 145kN Hydrajaws Pull-Testing Devices
• 5, 25 & 50 Ton Wireless Load Cells
• Various Other Equipment to Deliver the Best in Service
Acrodyne was established in 1985 by Stewart Mason and John Whykes who together had many years experience in servicing the process and control industries with products such as Foxboro, Taylor, Kent, Rosemount and DeZurik.
From this strong base of experience and knowledge Acrodyne has developed to specialise in actuation and control of valves, dampers and other rotating equipment. Located in Melbourne, Acrodyne services a broad range of industries from HVAC and general industry, to mining, water and waste water and off shore platforms throughout Australia and South East Asia. Our enthusiastic and dependable team has a broad range of capabilities including design and drafting, machining, electrical, instrumentation and control, on and off site repair work, field commissioning and industrial training.
We are flexible in our approach, understanding today’s business environment and are committed to providing exceptional customer service. As a leading supplier in our field, we boast one of the largest ranges of actuation and control products from companies such as Limitorque, Mastergear and Aunspach to name just a few, many of these products are stocked locally and can be provided through our vast national reseller network or as custom designed assemblies providing creative solutions to end users many and varied application needs.
ACS Equip provide a complete bore service portfolio to cover any aspect of your bore. Whether you require inspection, diagnosis and remediation of an existing issue or an ongoing preventative maintenance program, we have you covered.
OUR BORE MAINTENANCE SERVICE IS PROVEN TO:
• Increase Flow
• Increase Bore Output
• Increase Service Life of The Bore
• Increase Service Life of Pumping Equipment
• Reduce Bore Draw Down Level
• Reduce Bore Operating Costs
CCTV CAMERA INSPECTIONS
Advanced colour downhole cameras providing high quality video inspections with hole diameters from 25mm – 2000mm and Depth Capacity upto 2000m.
Whether its brushing to remove scale and rust, or high-pressure jetting to remove fouling from between the apertures and develops the bore we can get the job done. We also do chemical jetting which is targeted chemical jetting to remove bio-fouling, iron bacteria, calcium and mineralized deposits. Our services also include bailing and foreign object removal (fishing).
We do single casing patch – localized repair over small structural failures, polymer patching – slimline remediation method, and complete bore relines – for heavily corroded or damaged bores.
ACS are servicing and maintaining town and city water supply networks for over half a million people, irrigation bores for some of Australia’s largest farming operations and irrigation and stock bores for some of Australia’s smallest farming operations.
Activated Carbon Technologies Pty Ltd is an independently owned, 100% Australian company. We specialise in the production, sales, research and development and technical support for high quality activated carbons and anthracite that have been optimised for water treatment.
Our products include powdered activated carbons (PAC) for removal of pesticides, tastes, odours and toxins; granular activated carbons (GAC) including BAC; and impregnated carbons for sewerage odour control. ACTICARB PAC has been shown to be the best value for money in removing taste and odour compounds from drinking water by independent laboratories.
With offices in Melbourne, Brisbane and Wellington; a factory in Perth; a fully equipped water and carbon applications laboratory; and stores in Melbourne, Perth, Brisbane, Adelaide and Auckland; our products and staff are easily accessible throughout Australia and New Zealand.
Active Environmental Solutions (known as AES) are leaders in the supply of a full range of occupational health and safety and environmental monitoring equipment.
Our range is sourced from leading international manufacturers with whom we are proud to be associated. We work closely with them to ensure the products we sell are suitable for Australian conditions as we have the local awareness of our customer’s needs, the experience and knowledge.
Our strategic vision of Sensing Safety will be executed by enabling real-time or near-real-time insight for decision making for the safety, productivity and regulatory compliance of a workplace, employee, environment and community.
Technology is advancing at a rapid rate. It is AES’ mission to be the leader in providing enhanced outcomes for our customers in the world of connected Occupational Health and Safety and Environmental monitoring.
AES supplies instruments such as gas detectors, noise level meters and dust monitors to some of Australia’s leading companies in the oil and gas market, mining, manufacturing as well as various government institutions such as the police and fire departments.
Our commitment is to be our customer’s first choice, by setting the highest standards in customer satisfaction, innovative and cost-effective solutions and reliability of product and services.
To view our full range of products, please visit http://www.aesolutions.com.au or contact our head office on (03) 9464 2300.
WHO ARE WE?
ADM Instrument Engineering is a family run business that was established by our Managing Director, Glenn Bates in 1986.
Since then we have grown to become Australia’s largest stockist of MEAN WELL power supplies, Eurotherm industrial measurement and data Solutions, power transformers, industrial transducers and sensors and test & measurement instrumentation, suitable for a wide range of different applications.
WHAT DO WE DO?
We supply products such as power supplies, process controllers, data recorders, position sensors, pressure sensors, load cells, etc. to many different industries right across Australia. Our customers include businesses in the medical, food processing, machine building, system integration and post grad education industries and original equipment manufacturers.
But it doesn’t stop at stocking and supplying products.
We offer a wide range of services Australia wide, delivered by ADM’s highly dedicated and professional technical team. Our services include:
• Expertise and consultancy across all of our product range.
• Calibration of transducers, sensor and other equipment.
• Service and repair down to component level.
• Rental/loan of handheld test & measurement equipment.
HOW WE DO IT.
ADM has a strong commitment to holding stock. This means you know the product is available when you need it, allowing you to keep your inventory costs to the bare minimum.
We also offer volume pricing and scheduled ordering to original equipment manufacturers, who need to order in high quantities.
Our technical staff undertake regular factory training and have close working relationships with our leading suppliers, so that they are up to date with the latest technologies available. This ensures you have the best performing position transducers, load cells, led drivers and all other components for your application.
WHY DO WE DO IT?
Because it matters to you.
We understand that it matters that you can quickly get a product to your door.
And that you need to also get that product to your door at a fair and reasonable price.
We understand that technical support matters, which is why we keep our technical team up to date with the latest product information.
We understand that you want to partner with a supplier that is focused on what matters to you.
Contact ADM instrument engineering, Tel 1300 236 467, Fax +61 3 9551 6977, or send us an E-mail: email@example.com
ADVANCE UV SYSTEMS Pty Ltd (http://www.advanceuv.com.au) manufactures a broad range of WaterMark Level 1–certified ultra-violet water disinfection systems and supplies spare parts for most brands of UV units including open channel UV systems. We are Australian distributors for DWGV validated UV units from Aquafides, Switzerland.
We also supply a wide range of high-quality spare parts for municipal open channel and closed vessel UV disinfection plants including replacements for:
• Open channel UV lamps
• Open channel UV quarts modules, inserts, lamp connectors & lamp cables
• Quartz module wiper rings, wiper brushes
• Open channel UV sensors
• Open channel UV ballasts, etc.
Our replacement UV components come from quality suppliers to ensure reliable and effective performance. All of our staff have years of experience in the UV disinfection industry, so you will get the right advice and prompt service.
We manufacture our own range of closed vessel amalgam and medium pressure UV units for disinfection of potable water, storm water, waste water and chloramines reduction in swimming pools. Advance UV systems are certified to WaterMark Level1.
We can provide technical support for our products and sizing information based on respected independent third-party software provided by Bolton Photosciences Inc.
Please call/email us now for any UV spares you might need or to discuss any UV related questions.
Email: firstname.lastname@example.org, email@example.com Web: http://www.advanceuv.com.au
Phone: 02 9896 1165 Fax: 02 9896 4465
Click here to get your
business listed in the
Corporate Members Directory
PO Box 6012, Shepparton Victoria Australia 3632
24 New Dookie Road, Shepparton Victoria Australia 3630
03 5821 6744
03 5821 6033
ABN: 83 123 468 422