SEALING SOLUTIONS is a privately owned and operated Australian company that specializes in the supply and refurbishment of sealing products to a wide range of industries.

It is our commitment to provide the best service available across Australia.

Sealing Solutions provides:

• Dimensional replacements for all seals makes.
• Seal refurbishment of all makes. Supply of replacement parts where required.
• Quick turnaround for seal refurbishment.
• Staff members with several lifetimes worth of experience in the sealing industry.
• Australian distributor for Vulcan™ Engineering Ltd., the world’s leading single spring seal manufacturer.
• Since 1995 we have operated a fully equipped sales and service centre at Braeside, Victoria.

Semaphore is the manufacturer of the Kingfisher and Tbox range of telemetry products. Semaphore products are used in a vast range of water industry applications from simple pump monitoring to the control of sophisticated water and wastewater plants. Kingfisher products range in complexity from simple cost effective remote IO devices to control systems capable of supporting many thousands of IO points.

Semaphore support the Kingfisher and Tbox product range through a network of distributors and trained integrators both in Australia and throughout the world. The Kingfisher product range is designed in Melbourne Australia.

Refer to our website http://www.servelec-semaphore.com for further details

SMS MAINTENANCE SHAFTS & CHAMBERS

SMS (Sewer Maintenance Shaft) Pty Ltd is a proudly owned Australian company established in 2003 to manufacture and supply specialist products to the water industry. A quality accredited company, complying with AS/NZISO9001, SMS is located at 9A Colemans Road, Carrum Downs, VIC 3201. SMS has extensive experience and expertise in development of innovative products for the Australian water industry.

SMS Polypropylene maintenance shafts and chambers provide a low cost and safe alternative to traditional concrete manholes in sewerage and drainage systems. Since 2003, more than 20,000 shafts have been installed. These products are imported from Europe.

The range utilises RRJ sockets, with custom angled shafts assembled on the day of order with no fabrication required. SMS also stock a full range of maintenance shaft and chamber fittings including: access covers, caps, bends, junctions, drop tees etc.

The SMS range has been appraised as: WSAA Products Appraisal Report 137 Part 1, with product certification to WSA 137:2013 Industry Standard for Maintenance Shafts and Maintenance Chambers for Sewerage. The SMS Polypropylene maintenance shaft range has Water Mark Accreditation WMTS509-WM 040151 global-mark.com.au.

The AXEDO 600 maintenance chambers have been appraised to WSAA-137.2013 as WSAA Products Appraisal Report 1801 (formerly 1505).

SICK is one of the world’s leading manufacturers of sensors, safety systems and automatic identification products for Factory Automation, Logistic Automation and Process Automation applications. Whether automating factories or optimising distribution centres, or monitoring emissions from a stack, SICK provides cost-effective solutions.

Our company has pioneered a long line of industry firsts – such as the first safety light curtain, the first colour sensor, and many more. These innovations provide solutions to virtually every industry application.

SICK Pty Ltd was established in Australia as a wholly owned subsidiary of SICK AG, Germany in September 1982 with our New Zealand Sales Office established in March 1998. Our position as market leader for sensors has been built and continues to be built on the reputation of the quality of our products and our know-how to solve complex applications.

Our parent company, SICK AG was founded in 1946, and has grown a global presence with almost 50 national and international subsidiaries and sales offices. SICK currently employs more than 6,000 employees worldwide.

Simmonds & Bristow provides chemical & Microbiological analysis, scientific & engineering consulting services and registered training services to the water & environmental industries.

We offer a comprehensive service package for monitoring programs, technical support and training for regional water utilities, resorts, mines and other communities.

Environmental Solutions Bringing Freedom and Quality to Life.

Smart Lock is a structural pipeline repair product that revolutionizes in situ sewer and water pipeline repair. It provides trenchless point repair of damaged and defective in situ pipes caused by installation defects, soil movement, water infiltration, tree root infestation, construction and site damage and any other structural defects.

Smart Lock is a superior and permanent solution for end capping of redundant sewer lines and laterals.

Historically, felt liners and fiberglass patches have been the preferred method for repairing localised faults in pipes. Existing systems require lengthy cure times, making them labour and equipment intensive, and costly.

Smart Lock combines both proven fiberglass and mechanical point repair technologies into one efficient solution. The expandable locking system is manufactured from the highest grade of 3.16 stainless steel and has an external silicate impregnated glass mat. Smart Lock has been designed and developed with the installer and asset owner in mind.

With easy installation procedures, taking only around 20 minutes, Smart Lock can be installed into pipes that would traditionally requires costly bypass pumping and site management. With increased strength, and with reduced wear compared to traditional point repairs, Smart Lock is a step change when it comes to installing point repairs. Smart Lock is available in sizes from DN100mm to DN750mm in one piece units and DN900mm to 1500mm in two piece units.

The unit has been designed and manufactured in Victoria to withstand Australian conditions and to meet all appropriate industry standards.

Smart Lock Pty Limited
ABN 81 163 837 652
http://www.smartlockgroup.com
Patent US009261217B2
© Copyright 2017 Smart Lock Group – All Rights Reserved

HEADQUARTERED in France, SNF is the largest polyacrylamide manufacturer in the world, with the capacity to produce 710, 000 t of active polymer per year. The water soluble polymers it produces are used in drinking water and wastewater treatment, mining, agriculture, enhanced oil recovery, fracturing techniques, and paper, textile and cosmetics manufacturing.

The SNF Group comprises subsidiaries and joint ventures in more than 37 countries and operates 23 production sites in Europe, Asia, Australia and the Americas that employ more than 4100 people for total annual sales of US$ 2.7 billion. SNF is vertically integrated in its raw materials chain, with a global manufacturing capacity of 320,000tpa of biological acrylamide monomer.

The company’s wide range of polymers and chemistries includes cationic and anionic polyacrylamides, polyDADMAC, polyamines, polymer and inorganic blends, and custom polymers used as flocculants, coagulants, rheology modifiers and scale control agents. SNF also manufactures a full line of polymer feed equipment to optimise delivery of its products, and provides unparalleled technical service and support.

SNF has operated in Australia for 17 years and developed a manufacturing plant in Geelong, Victoria, in 2003. SNF is genuinely committed to providing complete customer solutions for the use and application of its products, backed by unparalleled support in handling and logistics. With these services available globally, SNF can support any water treatment and mining operation world-wide.

ABOUT SOLO WATER

Solo Water has been created to focus on services in the water industry while utilising the capabilities of Solo Resource Recovery and their 83 years of doing business in Australia.

Solo Water is wholly Australian owned and operated company that utilises the latest technology to provide a sustainable solution to the nation’s water industry. Solo Water is able to reduce the burden on our country’s precious water resources by recycling water to the highest standard.

This, in turn, benefits the customer through lower water costs and helps preserve the environment for future generations. The efficient use of water resources means less restrictions will be placed on the residents in the future should we have to begin rationing our water usage once more.

OUR VISION

To offer sustainable solutions to challenges faced by developers, industry leaders and government. To reduce the burden placed on water a precious resources.

We want to be the Private Water Utility of choice. To provide the latest technology and innovative infrastructure to the Water Industry Market.

OUR FOCUS

Our ultimate goal is to provide sustainable cost effective water solutions to developers of all sizes, local government and businesses. Our integrated approach with the clients allows us to tailor a solution that will maximise the return.

Fundamental to Solo Water is our constant drive to utilise an environmental friendly approach wherever possible. We do this by

• Using local wastewater and converting it to a highest standard Class A+ recycled water
• Reducing the wastewater that would otherwise be pumped in the waterways
• Creating a sustainable resource for the benefit of future generations

South Burnett Regional Council supplies potable water and wastewater services to the towns of Blackbutt, Kingaroy, Murgon, Nanango, Wondai and Proston. Smaller Non-potable water services are also provided to Proston Rural, Kumbia and Wooroolin. South Burnett Regional Council’s Water & Wastewater Branch is responsible for operating and maintaining treatment plants, pipelines, pumping stations and monitoring equipment associated with these schemes.