Polyweld Tech Academy is a Registered Training Organisation (RTO 40687) and was established in 2012 to cater for the increasing demand for quality assured poly pipe installation.

Polyweld Tech Academy is one of the leading RTOs offering training that enables you to be fully certified and qualified to work in the industry, where training is vital for thriving in the sector. All certifications offered at Polyweld Tech Academy are recognised and accepted within the industry and nationally.

Our courses cover the practical application and theoretical knowledge of poly welding and are conducted by some of the most experienced Polyweld experts in Australia. Our courses teach the correct techniques that are expected within the industry for successful butt welding, electrofusion welding, and extrusion welding.

Polyweld Tech Academy also has an onsite NATA accredited laboratory and inspection service provider. This enables us to conduct thorough QA/QC inspections to ensure you are creating quality welds that will last a lifetime.

Our capabilities:
– Nationally accredited training in Butt (PMBWELD301E), Electrofusion (PMBWELD302E), and Extrusion welding (PMBWELD309E).
– NATA Approved testing laboratory.
– QA/QC Inspection Services.
– Equipment Hire and Purchase.

For more information, please visit our website: http://www.polyweldtech.com.au

Process Control Services (PCS) provide measurement & dosing equipment for monitoring, control and optimization of water and wastewater treatment plants.

Continuous growth over the past twenty five years has led to PCS achieving an outstanding market profile. With offices in Sydney, Brisbane and Melbourne combined with a network of regional sales outlets PCS is able to deliver top quality international brands at very competitive prices, backed by an outstanding level of customer service throughout Australia and New Zealand.

Our product offering includes specialty measurements, general instruments, chemical dosing equipment, packaged solutions and customized accessories. Specialty measurements include dissolved oxygen, turbidity, suspended solids concentration, sludge blanket level, moisture, colour, chlorine, UV transmittance, ozone, peroxide and chlorine dioxide. General instruments include measurement and control products for flow, level, temperature, pressure, pH, ORP and conductivity. Chemical dosing equipment includes peristaltic, solenoid and motor driven dosing pumps.

Process Control Services (PCS) are renowned for their industry expertise together with their extensive choice and range of equipment. Their highly trained engineers are able to offer extraordinary levels of expert service and advice through combining their extensive product knowledge with industry experience.

If you have a problem, call us, we have the solution……

ProDetec is the exclusive Australia and NZ supplier of the Sigrist AquaScat for measuring the turbidity of filtered and raw water. The AquaScat features factory-accurate auto calibration and no maintenance due to its unique non-contact measuring cell.

Other Sigrist analysers are available for monitoring dissolved organics, colour, oil traces, ozone and UV absorbance.

ProDetec has factory trained service and sales engineers to ensure your installation works at its best. Local parts stock is held for quick turn-around on repairs.

For further information refer to prodetec.com.au or call +61 2 9620 8700

Pulsar Measurement is a leading manufacturer of flow and level measurement products for the water, wastewater, irrigation, environmental, mining, general industrial & manufacturing sectors.

Since 1986 Pulsar have developed, manufactured and marketed flow and level monitoring instruments including ultrasonic & radar level transmitters, clamp-on ultrasonic flow meters, and open channel flow meters.

Offering both radar and ultrasonic measurement technologies Pulsar Measurement has a range of solutions to meet your flow, level & volume applications through to more advanced pump control, sludge interface management, sand in oil monitoring and other process control applications.

Pulsar’s product range has been designed to provide a full range of alternatives, from single point of measurement installations right through to complex multi-point applications with digital communications and levels of measurement.

Pulsar have a network of in country representatives and distributors who can provide customer support and access to our products Australia wide.

Pump Systems PTY Ltd import equipment to pump and process wastewater. We specialise in digester mixing, tank mixing, solids handling pumps, screening, and sludge heat exchange.

Our Vaughan Rotamix sludge tank mixing systems are world leading. Performance is guaranteed, and all required maintenance is done without the need to drain the tank. Rotamix systems are currently in use, or in planning, at major municipalities in Queensland, New South Wales, Victoria, South Australia, and Western Australia.

Our Vaughan chopper pumps are guaranteed non-clogging pumps ideally suited to wastewater pumping stations that would normally block or clog due to rag and flushable sanitary products. These are extreme duty pumps, heavily overengineered for the toughest applications, and proven the world over in municipal, industrial, and agricultural applications.

Our Lackeby sludge heat exchangers offer superior efficiencies due to their patented turn chamber manifolds that induce turbulence at every turn, and conveniently hinge for easy maintenance. Available for sludge/water, or sludge/sludge heat exchange, Lackeby’s footprint is smaller for a given capacity than competing brands.

Rotating drum screens, channel screens, grit classifiers, floating decanters, a range of positive displacement solids handling pumps, and macerators complete our range of ancillary wastewater processing equipment.

qldwater is a business unit of IPWEAQ.  Its members include the majority of Queensland councils, other local and state government-owned water and sewerage service providers, and affiliates.

As the central advisory and advocacy body within Queensland’s urban water industry, qldwater is a collaborative hub, working with its members to provide safe, secure and sustainable urban water services to Queensland communities.

It achieves this goal through a variety of programs, most notably:
• The Queensland Water Regional Alliance Program – an LGAQ initiative (supported by the Queensland Government) aimed at helping Queensland councils work together at a regional scale to achieve efficiencies for their customers;
• The Statewide Water Information Management (SWIM) Program – advocacy and continuous improvement supported by a sophisticated regulatory and business reporting and benchmarking tool;
• The Queensland Water Skills Partnership – a collaboration among utilities to identify skills needs and solutions and encourage appropriate investment;
• Other industry advocacy services – focused on sustainable investment and planning, and fit for purpose regulation;
• Industry communication, innovation and marketing initiatives – creating a distinct profile for urban water and sewerage and celebrating its achievements with often limited resources, to make the industry an attractive place to work and exploit its competitive advantages and collaborative culture.